How it works
Press Start the noise meter and allow the microphone. The balls bounce higher as the room gets louder. The dashed line is your limit: when the class stays above it for a moment, the screen flashes and, if you want, a beep or a soft “shh” plays. The counter shows how many times the class went over the line, and the timer shows how long they have been quiet, which makes a good target for a reward.
Use Too loud at to move the line, and Sensitivity to match your room: turn it down for a busy group-work lesson, up for silent reading. The full-screen button fills the projector or smartboard.
Privacy
The sound level is measured in your browser, a few dozen times a second. Nothing is recorded, saved or sent to any server. Press Stop or close the tab and the microphone switches off.
Ideas for using it
- Quiet work: set the line low and aim for five quiet minutes, then ten.
- Group work: set it higher, so normal talk is fine and shouting is not.
- Transitions: leave it running while the class packs up or lines up.
- With the other tools: the class screen has the noise meter next to the name picker wheel, groups and the timer.
Questions
- Why does it say the microphone is blocked?
- The browser asks once. If you said no, click the lock or microphone icon in the address bar, allow the microphone, and press Start again.
- Is it a real decibel meter?
- No. Laptop microphones differ, so it shows a relative level from quiet to loud. Set the line by trying it with your own class.
- Does it work on a phone or tablet?
- Yes, in any current browser with a microphone.